I’ve always been a fan of HP laser printers because they were rugged, cheap per page, and the ink didn’t dry up if the machine was idle for a few weeks. Even though I don’t print that much, and arguably an ink jet would be more appropriate for the amount of printing that I do, I grew up with laser printers and like what I perceive as the bulletproof reliability.
Speaking of bulletproof reliability, my lightly used HP 2605dn ran out of color ink. So I spent $215 on genuine HP toner cartridges at Amazon.com and reloaded the 2605. Now it won’t print red. I called HP tech support and reached a very pleasant woman in Costa Rica. She said “do ‘calibrate color’ three times and then do ‘cleaning mode’ three times; four is better”. I did as she suggested and… the printer prints black, but no red, just as before. Putting the old cartridge back in doesn’t result in even a hint of red, so I don’t think that there is any problem with the new cartridge.
(The broken HP 2605dn was made in China; the made-in-Japan HP laserprinter that I bought in the late 1990s is still working in the home of a neighbor to whom I gave it. HP’s specifications claimed that the 2605dn could print up to 35,000 pages per month. If so, its life expectancy would be about two weeks, since mine died after printing 14,166 pages, a capital cost of 5 cents/page.)
Anyone have a straightforward idea for fixing the machine?
Failing an easy repair, anyone have a suggestion for a good home color laserprinter? It can’t be more than 20″ wide, 14″ deep, or 16″ tall. I want it to have an Ethernet interface (CAT 5). I’d rather buy something other than HP, now that I have a $700 doorstop (what I paid for the 2605dn) and about $300 in genuine(ly useless) HP toner cartridges.
[Perhaps this can be combined with tsunami relief if we can find a printer that is made in Japan.]
[Update: In the spirit of research, John Morgan and I (i.e., John Morgan), spent an evening carrying out the procedure described in http://www.reeves-hall.net/tech-gadgets/fixing-washed-out-colour-on-hp-color-laserjet-2605/ . After about two hours of clock time, we had the printer back together. The good news was that it printed in full color onto pages inserted into the one-sheet-at-a-time feeder. The bad news is that it would no longer grab pages from the paper tray, stopping with a perpetual “paper jam tray 2”. We put in another hour of monkeying with the connectors and then it more or less randomly started to work again. It turns out that the mechanical reassembly of the case can cause the machine to fail to feed paper from the tray. If we (i.e., John) had to do this again, it could probably be done in closer to one hour, but that’s pretty painful for a task that needs to be done every 10 days or so if printing at the rated duty cycle.]
Full post, including comments